|
Features |
|
Specifications |
|
Datasheet |
|
|
| |
- Powered by a 12VDC source and provides on/off/dimming control of lighting fixture(s) when used with Dim-to-Off capable dimmable drivers and ballasts.
- Built-in quick installation testing mode.
- 10 seconds to 60 minutes standby time delay for a wide range of installation locations and applications.
- Internal photodiode measures ambient light and observes threshold set at measured or preset light levels.
- IR remote control allows quick setup, settings adjustment, and manual on/off override.
- Compact, UV resistant, flame retardant, impact resistant, and recyclable polycarbonate construction.
- IP66 rated for use in outdoor/wet locations when fully installed in equivalent rated fixture.
- Multiple lenses available for different coverage areas.
|
Model No. |
S618-P-DR12VNR |
Input Voltage |
12VDC |
Photodiode Sensitivity Range |
1-185 fc |
Standby Time Delay Periods |
10 secs, 1 min, 5 mins (default), 15 mins, 30 mins, 60 mins |
Dimming Time Delay Periods |
1 min, 30 mins, 60 mins (default), off (dimming always on) |
Dimming Levels |
0%, 10%, 20% (default), 30% |
0-10VDC Dimming Current |
Max 100mA (sink) |
Thread Size |
G1 (BSW); Nominal: 1" |
Weatherproof Rating |
IP66 (when fully installed inside rated fixture) |
Dimensions |
2.36 x 2.36 x 1.59 in. |
|
|
| | |